Table of Contents
Advertisement
1. Select RADIO SETUP then RING VOLUME.
2. Select HIGH (loud) or LOW (soft) then press ENT.
4.4 Key Beep Volume (KEY BEEP)
You can change the key beep volume or turn the key beeps off completely.
RADIO SETUP
CH NAME
RING VOLUME
>KEY BEEP
1. Select RADIO SETUP then KEY BEEP.
2. Select the desired setting then press ENT.
4.5 Select Units (UNITS)
You can select your preferred measurement units for distance and cross track error.
RADIO SETUP
RING VOLUME
KEY BEEP
>UNITS
1. Select RADIO SETUP then UNITS.
2. Select your preferred measurement units then press ENT.
4.6 Internal Speaker Connections (INT SPEAKER)
You can switch the radio's internal speaker ON or OFF. The external speaker is always ON if a
speaker is plugged into the external speaker jack.
Note: To enable stereo FM speaker amplifiers, the internal speaker must be OFF.
RADIO SETUP
KEY BEEP
UNITS
>INT SPEAKER
1. Select RADIO SETUP then INT SPEAKER.
2. Select ON or OFF then press ENT to enable the desired setting and return to the menu.
4.7 Set the Priority Channel (WATCH MODE)
LVR-880US only.
If you are operating on the USA or Canadian channel banks, you can set the priority channel to cover
both CH16 and CH09 as well as the working channel, similar to a TRI WATCH.
RADIO SETUP
UNITS
INT SPEAKER
>WATCH MODE
KEY BEEP
HIGH
>LOW
OFF
UNITS
>METRIC
NAUTICAL
STATUTE
INT SPEAKER
>ON
OFF
WATCH MODE
>ONLY 16
16CH + 9CH
27
Advertisement
Table of Contents
