Table of Contents
Advertisement
GE Medical Systems
REV1
SECTION 3
CONTROL KEYBOARD
3–1
Lefthand Section of Control Keyboard
Note:
Note:
Note:
See Illustration 1–9
The lefthand section of the Control Console Keyboard is used to initialize or select
generator parameters.
1
SENOGRAPHE DMR `ON'
The indicator lamp is illuminated. The Control Console displays the last
configuration used.
2
SENOGRAPHE DMR `OFF'
The indicator lamp is illuminated.
3
SET UP Menu
Press key to enter Maintenance and Installation, or to access SET UP Menu
which is used to modify the following parameters:
D
Language of messages
D
Speed of compression
D
Programming maximum compression force
D
Automatic decompression.
D
Warning beep (maximum compression force reached)
D
Height of automatic decompression.
D
Disabling of exposure interlock
Access and description of all these parameters is given in Chapter 3, Maintenance.
4
Readout
The readout comprises two 40 character lines.
D
The upper line displays warning messages and fault messages.
D
The lower line displays selected parameters: focal spot, focal track, filter, FDC,
and SFC.
In SET UP mode, the operator can move within the menus and modify technical
parameters (refer to Chapter 3, Maintenance).
FDC = Film Density Control
SFC = Screen-Film Combination
1-25
SENOGRAPHE DMR+
om 5128689-2-100
Hide quick links:
Advertisement
Table of Contents
