St1Y16-Te2 Transistor Output Module (Source Type) - Mitsubishi MELESEC-ST User Manual

7 I/O MODULES

7.2.2 ST1Y16-TE2 transistor output module (source type)

Specifications
Number of occupied slice
modules
Number of occupied I/O points
Number of output points
Isolation method
Rated load voltage
Maximum load current
Maximum inrush current
Leakage current at OFF
Maximum voltage drop at ON
OFF to ON
Response time
ON to OFF
Surge suppressor
Fuse
Fuse blown indication
Wiring method for common
Dielectric withstand voltage
Insulation resistance
Noise durability
Protection of degree
Operating status
Available base module
Available coding element
5VDC internal current
consumption
Weight
*1: The fuse is provided to prevent the external wiring from burning when the output of the output module is
shorted. Therefore, the output module may not be protected. The fuse may not operate if the output module
is damaged in the failure mode other than a short circuit.
*2: A fuse blown is not detected when external supply power is off.
7 - 6
Type
Yes (Fuse blown indicated by ERR. LED, signal output to head module)
10M or larger by insulation resistance tester across DC external terminals and FG
By noise simulator of 500Vp-p noise voltage, 1
Spring clamp type
Screw clamp type
ST1A-CKY-08 (orange) (factory-fit) Refer to Chapter 8 for details.
ST1Y16
-TE2
RUN ERR
11 21 31 41 51
Transistor Output Module (source type)
ST1Y16-TE2
CC-Link: 0 point for input, 16 points for output
PROFIBUS-DP: 16 points for each of input and output
16 points
Photocoupler
24VDC (+20/-15%, ripple ration within 5%)
0.5A/point, 4A/common
4A, 10ms or less
0.1mA or less
0.2VDC (TYP.) 0.5A, 0.3VDC (MAX.) 0.5A
1ms or less
1ms or less (rated load, resistive load)
Zener diode
6.7A (unchangeable) (fuse blown capacity: 50A)
16 points/common
500VAC for 1 minute across DC external terminals and FG
and 25 to 60Hz noise frequency
First transient noise IEC61000-4-4: 1kV (bundle)
IP20
ON indication (LED)
ST1B-S3Y16 2-wire type + shield
ST1B-E3X16 2-wire type + shield
0.150A (TYP. all points ON)
0.11kg
Appearance
61 71 81 91 101 111 121 131
8
*1
s noise width
141 151 161
MELSEC-ST
*2
7 - 6