Accessories; End Plate, End Brackets; Markers - Mitsubishi MELESEC-ST User Manual

8 ACCESSORIES

8 ACCESSORIES

8.1 End Plate, End brackets

Product name
End plate ST1A-EPL
End brackets ST1A-EPL

8.2 Markers

Product name
Base module marker
Wiring marker
8
8 - 1
The end plate and end brackets are included with the head module prior to shipment.
They are also available as options.
Refer to Section 10.2 for installation and removal.
Model
Installed to protect the terminals of the rightmost end module from
exposure.
Installed on the left side of the head module and on the right side of the
last end slice module (assembled in the end plate) to sandwich and fix
the slice modules. This installation makes the base modules unmovable
under vibration, etc.
Refer to Section 10.2 for installation and removal.
Model
ST1A-BMK-50
Used to assign an identification No. to
ST1A-BMK-100
a base module to manage the
ST1A-BMK-150
installation position of a slice module.
ST1A-BMK-200
ST1A-WMK-BL
ST1A-WMK-RD
ST1A-WMK-GN
ST1A-WMK-BK
Used to identify the connection position
ST1A-WMK-BR
of a base module terminal block.
ST1A-WMK-
RD/BL
ST1A-WMK-
GN/YL
ST1A-WMK-WH
Purpose of use
Purpose of use
For No. 1 to 50
For No. 51 to 100
For No. 101 to 150
For No. 151 to 200
Terminal mark: Blue (-, 0V, N)
Terminal mark: Red (24VDC, 5VDC)
Terminal mark: Green (shield)
Terminal mark: Black (signal line)
Terminal mark: Brown (L1)
Terminal mark: Red/Blue (SYS, input)
Terminal mark: Green/Yellow (FG)
Terminal mark: White
MELSEC-ST
Dimensions
Refer to
Appendix 1.
Refer to
Appendix 1.
Description
8 - 1