St1X16-De1 Dc Input Module (Negative Common Type) - Mitsubishi MELESEC-ST User Manual

7 I/O MODULES

7.1.3 ST1X16-DE1 DC input module (negative common type)

Specifications
Number of occupied slice modules
Number of occupied I/O points
Number of input points
Isolation method
Rated input voltage
Rated input current
Input derating
ON voltage/ON current
OFF voltage/OFF current
Input resistance
OFF to ON
Response
time
ON to OFF
24VDC maximum current
Wiring method for common
Dielectric withstand voltage
Insulation resistance
Noise durability
Protection of degree
Operating status
Available base module
Available coding element
5VDC internal current consumption
Weight
*1: For response time of an input module, refer to Chapter 9.
7 - 3
Type
(During online module change, maximum inrush current is 2A/point (5ms))
10M or larger by insulation resistance tester across DC external terminals and FG
Spring clamp type
Screw clamp type
ST1A-CKY-02 (light gray) (factory-fit) Refer to Chapter 8 for details.
ST1X16
-DE1
RUN ERR.
11 21 31 41 51
DC Input Module (negative common type)
ST1X16-DE1
CC-Link: 16 points for input, 0 point for output
PROFIBUS-DP: 16 points for each of input and output
16 points
Photocoupler
24VDC (+20/-15%, ripple ratio within 5%)
Approx. 4mA
19V or higher/3mA or higher
11V or lower/1.7mA or lower
Approx. 5.6k
0.5ms/1.5ms or less (24VDC) Initial setting is 1.5ms.
0.5ms/1.5ms or less (24VDC) Initial setting is 1.5ms.
2A (total current of signal "+24V")
16 points/common
500VAC for 1 minute across DC external terminals and FG
By noise simulator of 500Vp-p noise voltage, 1
and 25 to 60Hz noise frequency
First transient noise IEC61000-4-4: 1kV (bundle)
ON indication (LED)
0.120A (TYP. all points ON)
Appearance
61 71 81 91 101 111
8
None
s noise width
IP20
ST1B-S4X16 2 to 4-wire type
ST1B-E4X16 2 to 4-wire type
0.11kg
121 131 141 151 161
MELSEC-ST
*1
*1
7 - 3