Siemens SIMATIC ET 200SP Equipment Manual page 15

Product overview
2.1 Properties
Properties
The module has the following technical properties:
• Fail-safe digital module
• PROFIsafe
• RIOforFA-Safety
• PROFIsafe address type 2
• 8 inputs (SIL3/Cat.3/PLd) or 4 inputs (SIL3/Cat.4/PLe)
• 8 outputs for sensor supply
• Use of various interconnection types (1oo1, 1oo2) is possible
• Supply voltage L+
• Sink input (P-reading)
• Suitable for the connection of 3-/4-wire sensors according to IEC 61131, Type 1
• Channel-specific assignable input delay 0.4 ms to 20 ms
• Internal short-circuit-proof sensor supplies for each input
• External sensor supply possible
• Diagnostic display (DIAG red/green LED)
• Status display for each input (green LED)
• Error display for each input (red LED)
• Diagnostics
– e.g. short-circuit, channel-based
– e.g. load voltage missing, module-based
• Channel-based or module-based passivation
The module supports the following functions:
• Firmware update
• I&M identification data
• Service data
If you have configured the digital input module F-DI 8x24VDC HF (6ES7136-6BA00-0CA0) in
a plant, but have inserted the digital input module F-DI 8x24VDC HF (6ES7136-6BA01-
0CA0) instead, the information from the manual of the digital input module F-DI 8x24VDC
HF (6ES7136-6BA00-0CA0) still applies.
16
WARNING
Digital input module F-DI 8x24VDC HF (6ES7136-6BA01-0CA0)
Equipment Manual, 10/2021, A5E50578307-AA