Datafill; Table 26 Field Descriptions For Table Exndinv For Eiu Datafill - Nortel DMS-100 User Manual

98 Chapter 3: EIU datafill
Datafill
Table 26 lists the fields and value ranges used to datafill an EIU in table
EXNDINV.
While table 26 provides all the information you need to datafill for EIUs,
complete information on table EXNDINV is in DMS-100 Translations Guide,
297-xxxx-350.

Table 26 Field descriptions for table EXNDINV for EIU datafill

Field Subfield or
refinement
EXNDKEY
ENPMTYPE
ENNODENO
ENNAME
ENADDR
ADDRTYPE
(Sheet 1 of 5)
297-8991-910 Standard 03.01 August 1999
Entry Explanation and action
see subfields External node key
This key field consists of subfields
ENPMTYPE and ENNODENO.
EXND External node peripheral module type
Enter the PM type as follows:
•
Note: These nodes are defined for all
products. A product may define
additional types of nodes that are valid
only for that product.
External node number
0 to 31
Enter a number to identify the external
node number of the external node PM
type.
alphanumeric External node name
(vector of up to 12 Enter an external node name. If the
characters) external node runs the UNIX operating
system, a suggested value for the field
is the UNIX host name of the node,
however, this is not enforced.
vector of up to 2 External node address
elements This field is a vector of addresses for the
external node. Each element of the
vector contains an address type and an
address. For EIUs, the address is
IPADDRESS
Address type
ENIP
If the external node is an Ethernet node
that has an IP address and responds to
ICMP.
EXND (external node)