Nortel DMS-100 User Manual page 100

100 Chapter 3: EIU datafill
Table 26 Field descriptions for table EXNDINV for EIU datafill (continued)
Field Subfield or
refinement
FLOOR
ROW
POSITION
ENTYPE
ENINFO
ENPROCSR
ENPROTCL
(Sheet 3 of 5)
297-8991-910 Standard 03.01 August 1999
Entry Explanation and action
0 to 99 Floor number
Enter the number of the floor on which
the node is located.
A to Z or Row
AA to ZZ Enter the row on the floor in which the
(excluding I, O, II, node is located.
and OO)
0 to 99 Bay position
Enter the position of the bay in the row
where the node is located.
alphanumeric External node type
(vector of up to 12 Enter the type of the node, for example,
characters) SUN or HP. This value must first be
datafilled in table ENTYPES.
alphanumeric External node information
(table of up to 20 Enter a string containing any additional
characters) information about the node.
Character strings that contain blank
characters must be entered with three
single quotation marks at the start of the
string and three single quotation marks
at the end of the string.
ALL External node processor class
CORE Enter the set of SuperNode processor
EIU types with which the external node is
NONE allowed to communicate.
Table control provides the user with the
capability of entering ALL or NONE. If
ALL is entered, values CORE and EIU
are automatically datafilled by table
control.
ALL External node protocol
ICMP Enter the set of protocols with which the
TCP external node can communicate with
UDP the SuperNode.
NONE
Table control provides the user with the
capability of entering ALL or NONE. If
ALL is entered, values ICMP, UDP, and
TCP are automatically datafilled by
table control.