Nortel DMS-100 User Manual page 127

5 Determine the next step.
If the file
is not stored the
current local directory
is stored on the
current local directory
6 Change directory on the local host (DMS-100 switch) by typing
ftp> lcd path_name
and pressing the Enter key.
where
path_name
Example:
ftp> lcd '/S00DTEMP'
Example of a MAP response
FTP: Local directory changed.
7 Determine the next step.
If the filename
has an extension that
CANNOT have the
record length
automatically
detected. Refer to the
section "Automatic
record length
detection in this
appendix".
has an extension that
can have the record
length automatically
detected
8 Set the record length of the file by typing
ftp> lrecl rec_length
and pressing the Enter key.
where
rec_length
Example:
ftp> lrecl 256
This example sets the default record length on the DMS-100 switch to 256.
Do
step 6
step 7
is a valid directory path
Do
step 8
step 10
is the record length required for the file
DMS-100 Family EIU User Guide TELECOM12
Appendix C: Using FTP 127