Datafill Sequence And Implications; Datafill; Table 13 Field Descriptions For Table Iprouter For Eiu Datafill - Nortel DMS-100 User Manual

Datafill sequence and implications
The following tables must be datafilled before table IPROUTER:
•
•
•
Before entering data in table IPROUTER, Nortel Networks recommends to
place the default EIU in the off-line state.
Datafill
Table 13 lists the fields and value ranges used to datafill an EIU in table
IPROUTER.
While table 13 provides all the information you need to datafill for EIUs,
complete information on table IPROUTER is in DMS-100 Translations Guide,
297-xxxx-350.

Table 13 Field descriptions for table IPROUTER for EIU datafill

Field Subfield or
refinement
RKEY
ROUTER
WORD_EIU
EIU_RNG
SNIPADR
ETHIPADR
(Sheet 1 of 2)
PMLOADS
LIUINV
IPNETWRK
Entry
0 to 63
see subfields
EIU
0 to 750
table of 4 digits
(0 to 255)
table of 4 digits
(0 to 255)
Explanation and action
Router key
Enter the identification number of the IP
router. This is the key into the table.
Router
This field consists of subfields
WORD_EIU and EIU_RNG.
Ethernet interface unit
Enter EIU (Ethernet interface unit).
Entries outside this range are invalid.
Ethernet interface unit range
Enter the specific EIU to be accessed
for the router index.
Supernode-side Internet Protocol
address
Enter the SuperNode-side IP address.
Ethernet-side Internet Protocol address
Enter the Ethernet-side IP address.
DMS-100 Family EIU User Guide TELECOM12
Chapter 3: EIU datafill 79