Nortel DMS-100 User Manual page 133

where
user_id
Example:
ftp>deluserinfo 'johnh'
Example of a MAP response:
DELETE USERINFO PASSED
This userID can no longer FTP to this node and login using the userID and
password of johnh johnh.
3 Unreserve a session by typing
ftp> svunreserve 1
and pressing the Enter key.
Example:
ftp>svunreserve 1
Example of a MAP response:
0 SERVER SESSIONS STILL RESERVED.
4 You have completed this procedure.
Procedure 10 Adding a userID with limited set of commands
Use this procedure to add a userID with a limited set of commands.
Step Action
1 Start the FTP tool without connecting to a host by typing
ftp> ftp
and pressing the Enter key.
2 Reset the command mask to allow all commands by typing
ftp> commandmask clear
and pressing the Enter key.
Example:
ftp>commandmask clear
Example of a MAP response:
Command mask has been cleared.
3 Set the command mask to disallow userID from using a command by typing
ftp> commandmask command mask_state
and pressing the Enter key.
where
command
mask_state
Example:
is the userID
is a specific command
is permission to use the command: clear gives permission,
set denies permissions
DMS-100 Family EIU User Guide TELECOM12
Appendix C: Using FTP 133