Nortel DMS-100 User Manual page 139

Table 35 FTP operations reference: DMS to workstation
Action
Change the working directory on the
workstation
Change the working directory on the
DMS
Display the working directory on the
DMS
List the directory contents on the
workstation
Turn off automatic record length
detection
Turn on automatic record length
detection
Get an ASCII file from the workstation
(Sheet 2 of 3)
Command sequence
CM> cd 'path_name'
where
path_name is a valid path from the current working
directory on the workstation
Use single quotation marks only if the directory name is in
lowercase.
CM> lcd '/PATH_NAME'
where
path_name is a valid path from the current working
directory
CM> lcd
CM> ls
CM>autolrecl off
CM>autolrecl on
CM> ascii
CM> get 'file_name1.txt132'
where
filename is the name of the file on the workstation
If filename is in lowercase, use single quotation marks
around the name.
The above command sequence
• sets the transfer type to ASCII
• puts the file in the current directory of the DMS
DMS-100 Family EIU User Guide TELECOM12
Appendix C: Using FTP 139