Nortel DMS-100 User Manual page 128

128 Appendix C: Using FTP
9
10
11
297-8991-910 Standard 03.01 August 1999
Get an ASCII file from the remote host by typing
ftp>get file_name1
and pressing the Enter key.
where
file_name1 is the name of the file on the remote directory
Example:
ftp> get 'file1.dmo'
This example gets a file named file1.dmo from the remote host and renames
it to FILE1 on the DMS-100 switch.
Example of a MAP response :
226 Transfer complete.
35334bytes transferred in 0 hrs. 0 mins. 12 secs. 42 ms.
(3282 Bps)
Go to step 11.
Get an ASCII file from the remote host by typing
ftp>get file_name1
and pressing the Enter key.
where
file_name1 is the name of the file on the remote directory
Example:
ftp> get 'file1.txt54'
This example gets a file named file1.txt54 from the remote host and renames
it to FILE1 on the DMS-100 switch.
Example of a MAP response:
226 Transfer complete.
35334bytes transferred in 0 hrs. 0 mins. 12 secs. 42 ms.
(3282 Bps)
Put an ASCII file on the remote host by typing
ftp>put file_name1 file_name2
and pressing the Enter key.
where
file_name1 is the name of the file on the local host directory
file_name2 is the name of the file on the remote host directory
Example:
ftp> put 'RECORDFILE' 'jan18.log'
This example takes the file RECORDFILE from the DMS-100 switch,
renames it jan18.log and puts it on the remote host.
Example of a MAP response :
226 Transfer complete.
12365 bytes transferred in 0 hrs. 0 mins. 4 secs. 110 ms.
(3008 Bps)