Sample Datafill For Table Ipthron; Figure 19 Datafill Example For Table Ipthron; Table Ipproto - Nortel DMS-100 User Manual

Table 22 Field descriptions for table IPTHRON for EIU datafill (continued)
Field Subfield or
refinement
EIUINDEX
ELIUINDEX
MSINDEX
TXCAPCT
(Sheet 3 of 3)
Sample datafill for table IPTHRON
Figure 19 shows sample datafill for table IPTHRON for an EIU.
Figure 19 Datafill example for table IPTHRON
LMSNODE TXCAPCT RXCAPCT
-------------------------------------------------------------------------------
EIU 117 15

Table IPPROTO

Table IPPROTO is rarely used and normally does not need to be datafilled.
Entry
0 to 750
0 to 750
0 to 1
0 to 32767
15
Explanation and action
Ethernet interface unit index
If the entry in field SNNODE is EIU,
enter the EIU index.
Go to refinement TXCAPCT.
Ethernet link interface unit index
If the entry in field SNNODE is ELIU,
enter the ELIU index.
Go to refinement TXCAPCT.
Message switch index
If the entry in field SNNODE is MS,
enter the MS index.
Go to refinement TXCAPCT.
Transmit capacity
Enter the IP transmission rate in kilobits
per second from node to node. The
node name and number are specified
as a key to this tuple.
DMS-100 Family EIU User Guide TELECOM12
Chapter 3: EIU datafill 93
OPTION
$