Nortel DMS-100 User Manual page 129

12 You have completed this procedure.
Procedure 6 Copying a binary file from the remote host
Step Action
1 Establish an FTP session and determine your location as described in
procedure 1 in this appendix.
2 Determine the next step
If the file
is not on the current
remote directory
is on the current
remote directory
3 Change directory on the remote host by typing
ftp> cd path_name
and pressing the Enter key.
where
path_name
Example:
ftp> cd ' /team/bin'
Example of a MAP response:
250 CWD command successful.
4 Set the file type to binary by typing
ftp> binary
and pressing the Enter key.
Example of a MAP response:
200 Type set to I.
5 Determine the next step.
If the file
is not stored on the
current local directory
is stored on the
current local directory
6 Change directory on the local host (DMS-100 switch) by typing
ftp> lcd path_name
and pressing the Enter key.
Do
step 3
step 4
is a valid directory path
Do
step 6
step 7
DMS-100 Family EIU User Guide TELECOM12
Appendix C: Using FTP 129