Planning/Configuring; Integrating The Hcs4300 Into The Profinet Configuration; Integrating The Hcs4300 Into The Profibus Configuration - Siemens SIPLUS HCS Operating Instructions Manual

Planning/configuring

8.1

Integrating the HCS4300 into the PROFINET configuration

Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4300 yet, it
can be integrated by installing an HSP. HSPs are available for TIA V12/V13, Classic V5.5
and can be downloaded from the Service & Support website
(http://www.siemens.com/automation/service&support
Procedure with non-Siemens controllers
For PROFINET configuration you will need the language-specific GSDML file. The GSDML
file must be installed in the configuration software.
You can download the GSDML file "GSDML-V2.3-Siemens-002A-HCS4300-
from the Siemens Service & Support website
(http://www.siemens.com/automation/service&support).
If a non-Siemens PROFINET controller is used, install the GSDML file as described in the
manufacturer's instructions.
8.2

Integrating the HCS4300 into the PROFIBUS configuration

Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4300 yet, it
can be integrated by installing the GSD file. This is available in German (SIEM81C5.gsg)
and English (SIEM81C5.gse) versions and is available for download from the Siemens
Service&Support Portal
Procedure with non-Siemens controllers
You will need the language-specific GSD file for PROFIBUS configuration. You can
download the SIEM81C5.gsx files from the Siemens Service&Support portal
(http://www.siemens.com/automation/service&support
If a non-Siemens PROFIBUS controller is used, install the GSD file as described in the
manufacturer's instructions.
SIPLUS HCS4300
Operating Instructions, 11/2015, A5E35452705A/002
(http://www.siemens.com/automation/service&support
/).
yyyymmdd
/).
8
"
/).
61