Siemens SIPLUS HCS Operating Instructions Manual page 10

Introduction
1.1 Introduction
Scope of validity of this document
This documentation is valid for all components of the SIPLUS CMS4300 specified in these
operating instructions and describes the most recent delivery state at the time of writing.
Note
Note for devices up to firmware version 1.x
• A maximum of 6 POMs can be operated.
• Expansion module, PMs and the DP connection are not available
• The following applies for reading datasets 152, 200 and 201: The information that is read
is always for the full configuration, i.e. for 54 channels or 6 POMs.
• The datasets 160, 190 and 202 are not available.
Naming conventions and abbreviations
A synonym or an abbreviation is sometimes used in this documentation instead of the full
product name.
The followings terms and abbreviations are used:
SIPLUS HCS4300
Power Output Module
Central Interface Module
I/O module
Registered trademarks
SIPLUS ® is a registered trademark of Siemens AG.
10
HCS
POM
CIM
PM
Operating Instructions, 11/2015, A5E35452705A/002
SIPLUS HCS4300