Installing The Em4315 Expansion Module; Installing The I/O Module (Pm) - Siemens SIPLUS HCS Operating Instructions Manual

Installing/mounting

5.4 Installing the EM4315 expansion module

5.4 Installing the EM4315 expansion module
Tool
You will need a Torx T10 screwdriver.
Installing the EM4315 expansion module
Proceed as described in Section Installing the Central Interface Module (Page 39).
5.5

Installing the I/O module (PM)

The CIM is equipped with a receptacle for one I/O module.
NOTICE
The I/O module may only be inserted or removed when the power is off.
Tool
You will need a Torx T8 screwdriver.
40
Operating Instructions, 11/2015, A5E35452705A/002
SIPLUS HCS4300