Table of Contents
Advertisement
Step 5: Route Audio
To route audio from the MXA910 to other Shure devices, use Designer. For non-Shure devices, use Dante Controller software.
We'll route audio from the MXA910 to an ANIUSB-MATRIX.
1.
Add the ANIUSB-MATRIX to your location.
2.
Go to Signal flow. This page creates Dante audio routes between Shure devices.
3.
Drag and drop from the MXA910 automix output to the ANIUSB-MATRIX Dante input to create a Dante audio route.
4.
Test your system's audio routes, and send audio from the ANIUSB-MATRIX to other Dante devices or codecs.
Shure Incorporated
11/59
Advertisement
Table of Contents
