Table of Contents
Advertisement
Default Settings
Microphone Status
Active
Mute
Hardware identification
Firmware update in progress
Reset
Error
Device power-up
Note: When the LED is disabled, the LED still illuminates while the device is powering up and when an error state occurs.
Customizing Lighting Settings
Custom LED brightness, colors, and behaviors are assignable in the control software. They can also be controlled through an
external control system:
1.
Open the Configuration tab
2.
Select Light Bar
LED Behavior / Color
Green (solid)
Red (solid)
Green (flashing)
Green (progresses along bar)
Network reset: Red (progresses along bar)
Factory reset: Triggers device power-up
Red (split, alternate flashing)
Multi-color flash, Blue (moves quickly back and forth across
bar)
Shure Incorporated
17/59
Advertisement
Table of Contents
