Position Microphone Coverage
1.
Add channels by clicking Add channel above the workspace.
2.
Enter the talker height by selecting a channel and providing the value in the Properties. This ensures accurate aiming.
3.
Move channels to cover the appropriate areas:
◦
Channels are independently selectable and can be moved anywhere within the maximum allowed coverage area. If
dragged outside of this region, lobes turn red and revert back to the last acceptable position.
◦
Position the channels by dragging or nudging them into place. Distance values to the device and to the workspace
0,0 are calculated in the properties panel.
◦
Use the grid to measure the precise placement.
Adjust Channel Width
Independent width control makes it possible for some channels to capture individual talkers (narrow), while others cover multi
ple talkers (wide).
To change a channel width:
1.
Select the channel
2.
Choose a width setting from the pull-down menu. The width is calculated and displayed, based on the lobe location and
heights entered for the device and talker.
Width Settings:
•
Narrow (35°)
•
Medium (45°)
•
Wide (55°)
Channel widths for the three settings with the microphone 6 feet above a table
Shure Incorporated
36/59