Table of Contents
Advertisement
•
Analog block or XLR cables to connect components to ANI22
•
Any other speakers or amplifiers
Use Case: Medium or Large Room with 2 MXA910s and a P300
In larger installations, you can use multiple MXA910s and a P300 for a distributed DSP approach that makes installation sim
pler. For best results, use a maximum of 3 MXA910s.
•
Ceiling arrays handle DSP (with firmware >4.x)
•
P300 provides matrix mixer and connection options for mobile devices, USB, and analog block in/out
•
Designer controls microphones and P300
Equipment List:
•
2 MXA910s (needs firmware >4.x for AEC)
•
P300
•
Network switch supplying Power over Ethernet Plus (PoE+)
•
Computer on network with:
◦
Shure Designer software or
◦
Device web applications
•
Cat5e (or better) Ethernet cables
•
Any other speakers, mobile devices, codecs, or displays
Hardware
Network Ethernet Port
The network port carries all audio, power, and control data. It is located on the back panel as shown.
Shure Incorporated
15/59
Advertisement
Table of Contents
