Step 5: Route Audio - Shure MXA910 Manual

Step 5: Route Audio

To route audio from the MXA910 to other Shure devices, use Designer. For non-Shure devices, use Dante Controller software.
We'll route audio from the MXA910 to an ANIUSB-MATRIX.
1. Add the ANIUSB-MATRIX to your location.
2. Go to Signal flow. This page creates Dante audio routes between Shure devices.
3. Drag and drop from the MXA910 automix output to the ANIUSB-MATRIX Dante input to create a Dante audio route.
4. Test your system's audio routes, and send audio from the ANIUSB-MATRIX to other Dante devices or codecs.
Shure Incorporated
11/59