Lan Setup Ipv6: Edit - ZyXEL Communications SBG5500 Series User Manual

Table 24 LAN Setup: Edit > General / IPv4 (continued)
LABEL
DNS Server 2
Remote DHCP
Server
DHCP Option
Setup
TFTP Server
Name (option
66)
Bootfile Name
(option 67)
TFTP Server
Address (option
150)
OK
Cancel

6.3.2 LAN Setup IPv6: Edit

Click the IPv6 tab in Configuration > LAN / Home Network > LAN Setup > Edit to configure IPv6 LAN
settings on the SBG. This screen is available only when you select IPv4 IPv6 Dualstack in the IPv4 / IPv6
Mode field of the LAN Setup > Edit > General / IPv4 screen.
Chapter 6 LAN
DESCRIPTION
Specify the IP address of the secondary DNS server for the DHCP clients to use. Use one of the
following ways to specify the IP address.
DNS Proxy - the clients use the IP address of the SBG LAN interface. The SBG redirects clients' DNS
queries to a DNS server for resolving domain names.
Static - enter a static IP address.
From Wan Interface - select the WAN interface that receives the DNS server address from its
DHCP server.
Enter the DHCP server's address so the SBG forwards DHCP requests to this address.
This field is only available when you select DHCP Relay.
These fields display when you select DHCP Server in the DHCP Mode field. You may need to
configure them when you have VoIP phones on your LAN.
Enter the name of a TFTP server to assign it to the DHCP clients.
Enter the name of a bootfile to assign it to the DHCP clients.
Enter the IP address of a TFTP server to assign it to the DHCP clients.
Click OK to save your changes.
Click Cancel to restore your previously saved settings.
SBG5500/3310 Series User's Guide
92