The Zone Control Screen - ZyXEL Communications SBG5500 Series User Manual

Figure 116 Trust Domain: Add/Edit
The following table describes the labels in this screen.
Table 59 Trust Domain: Add/Edit
LABEL
IP Address [/Prefix Length
(optional)]
OK
Cancel

9.6 The Zone Control Screen

Use this screen to set the firewall's default actions. Firewall rules are grouped based on the direction of
travel of packets to which they apply.
Click Configuration > Firewall / Security > Zone Control to display the following screen.
Figure 117 Configuration > Firewall > Security > Zone Control
Chapter 9 Firewall
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the SBG from
the WAN. You can also enter the prefix length of the IP address.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
SBG5500/3310 Series User's Guide
148