ZyXEL Communications SBG5500 Series User Manual page 222

Table 102 Configuration > Log / Report > Log Settings > Edit (System and Email)
LABEL
TLS Security
Security
Mail Subject
Alert Mail Subject
Send From
Send Log to
Send Alerts to
Sending Log
Day for Sending Log
Time for Sending Log
SMTP Authentication
Username
Password
Retype to Confirm
Log Consolidation
Enable
Log Consolidation Interval
(seconds)
Log Settings
System Log
Chapter 13 Log / Report
DESCRIPTION
Select the check box if you want encrypted communications between the mail
server and the SBG.
Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS).
Select STARTTLS to upgrade a plain text connection to a secure connection using
SSL/TLS.
Type the subject line for the outgoing e-mail.
Type the subject line for the outgoing alert e-mail.
Type the e-mail address from which the outgoing e-mail is delivered. This address is
used in replies.
Type the e-mail address to which the outgoing e-mail is delivered.
Type the e-mail address to which alerts are delivered.
Select how often log information is e-mailed. Choices are: When Full, Hourly and
When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full.
This field is available if the log is e-mailed weekly. Select the day of the week the log
is emailed.
This field is available if the log is e-mailed weekly, daily or hourly. Select the time of
day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Select this check box if it is necessary to provide a user name and password to the
SMTP server.
This box is effective when you select the SMTP Authentication check box. Type the
user name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Type the password again to make sure that you have entered is correctly.
Select this to activate log consolidation. Log consolidation aggregates multiple log
messages that arrive within the specified Log Consolidation Interval. In the Log
Viewer tab, the text "[count=x]", where x is the number of original log messages, is
appended at the end of the Message field, when multiple log messages were
aggregated.
Type how often, in seconds, to consolidate log information. If the same log message
appears multiple times, it is aggregated into one log message with the text
"[count=x]", where x is the number of original log messages, appended at the end
of the Message field.
Use the System Log drop-down list to change the log settings for all of the log
categories.
disable all logs (red X) - do not log any information for any category for the system
log or e-mail any logs to e-mail server 1 or 2.
enable normal logs (green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the
SBG will e-mail logs to them.
enable normal logs and debug logs (yellow check mark) - create log messages,
alerts, and debugging information for all categories. The SBG does not e-mail
debugging information, even if this setting is selected.
SBG5500/3310 Series User's Guide
222