Device Service: Edit; Trust Domain: Add/Edit - ZyXEL Communications SBG5500 Series User Manual

Table 57 Configuration > Firewall / Security > Device Service
LABEL
Apply
Reset

9.5.1 Device Service: Edit

Double click a Service or select one and click Edit to open the following screen.
Figure 115 Device Service: Edit
The following table describes the labels in this screen.
Table 58 Device Service: Edit
LABEL
Service
Port
Trust Domain
LAN Interface
WAN Interface
OK
Cancel

9.5.2 Trust Domain: Add/Edit

Use this screen to configure a public IP address which is allowed to access the SBG. Double click an IP
Address or select one and click Edit to open the following screen.
Chapter 9 Firewall
DESCRIPTION
Click Apply to save your changes.
Click Reset to restore your previously saved settings.
DESCRIPTION
This is the service you may use to access the SBG.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click the check box if the services is allowed access to the SBG from the trust domain.
Click the check box if the services are allowed access to the SBG from the LAN.
Click the check box if the services are allowed access to the SBG from all WAN connections,
or specify the interfaces individually.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
SBG5500/3310 Series User's Guide
147