Lan Setup: Edit - ZyXEL Communications SBG5500 Series User Manual

Table 23 Configuration > LAN / Home Network > LAN Setup
LABEL
DHCP
IPv6
Address Assign

6.3.1 LAN Setup: Edit

In Configuration > LAN / Home Network screen select an entry and click Edit to open the following
screen.
Figure 63 LAN Setup: Edit > General / IPv4
Chapter 6 LAN
DESCRIPTION
This shows whether the SBG acts as DHCP Server or DHCP Relay agent. It shows
Disable if the DHCP server has been stopped in the SBG.
This shows the IPv6 prefix and prefix length you configured when you enable IPv6 on
the LAN interface and set
This field displays 1 when the IPv6 address is assigned using IPv6 stateful
autoconfiguration (DHCPv6) or 0 when the SBG uses IPv6 stateless
autoconfiguration.
• Stateless: The SBG send IPv6 prefix information in router advertisements
periodically and in response to router solicitations.
• Stateful: The DHCPv6 server is enabled to have the SBG act as a DHCPv6 server
and pass IPv6 addresses to DHCPv6 clients.
SBG5500/3310 Series User's Guide
90