ZyXEL Communications SBG5500 Series User Manual page 30

If you select PPPoE or PPPoA as your encapsulation, type the Username given to you by your ISP and
3
type the Password associated with the user name.
Figure 17 PPP information
Use this screen to specify which IPv4 address the SBG uses to connect to the Internet. If your ISP gave
4
you this information, enter it here. Otherwise select Obtain an IP Address Automatically.
Figure 18 IPv4 Address
Choose whether SBG gets DNS server addresses from the ISP automatically or uses the DNS server
5
addresses you got from the ISP. A DNS server is used for mapping a domain name to its corresponding IP
address and vice versa.
Chapter 3 Wizard
SBG5500/3310 Series User's Guide
30