ZyXEL Communications SBG5500 Series User Manual page 198

Figure 145 Configuration > Bandwidth Management > Queue Setup
The following table describes the labels in this screen.
Table 87 Network Setting > QoS > Queue Setup
LABEL DESCRIPTION
Add Click this button to create a new queue entry.
Edit Double-click a queue entry or select it and click Edit to open a screen where you can modify
the queue's settings.
Remove To remove an existing queue entry, select it and click Remove. Note that subsequent rules move
up by one when you take this action.
Multiple Entries Select a queue and click this to enable it.
Turn On
Multiple Entries Select a queue and click this to disable it.
Turn Off
# This is the index number of the queue entry.
Status This field displays whether the queue is active or not. A green ON button signifies that this queue
is active. A gray OFF button signifies that this queue is not active.
Click the slide button to turn on or turn off the queue.
Name This shows the descriptive name of this queue.
Interface This shows the name of the SBG's interface through which traffic in this queue passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer This shows the queue management algorithm used for this queue.
Management
Queue management algorithms determine how the SBG should handle packets when it
receives too many (network congestion).
Rate Limit This shows the maximum transmission rate allowed for traffic on this queue.
Chapter 11 Bandwidth Management
SBG5500/3310 Series User's Guide
198