Add A Wifi Schedule - NETGEAR WAC104 User Manual

Add a WiFi schedule

You can use this feature to turn off the WiFi signal from your AP at times when you do
not need a WiFi connection. For example, you might turn it off at night or for the
weekend. You can add a separate WiFi schedule for each WiFi band. You can also add
multiple schedules for each WiFi band.
Note: You can add a WiFi schedule only if the AP is connected to the Internet and
synchronizes its internal clock with a time server on the Internet. For more information
about whether the AP synchronizes its clock, see Set the time zone and adjust the daylight
saving time on page 28.
To add a WiFi schedule for a WiFi band:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
Manage the Advanced WiFi
Features
802.11ac Wireless Access Point Model WAC104
69 User Manual