Change The Language - NETGEAR WAC104 User Manual

The Home page displays a dashboard that lets you see the status of your AP at a glance.
You can click the IP Settings, Wireless Settings (2.4GHz b/g/n), or Wireless Settings
(5GHz a/n/ac) heading to view more detailed information. For more information, see
View information about the AP and the IP and WiFi settings on page 61. The left column
displays the main menu.

Change the language

By default, the language is set as Auto. You can change the language.
To change the language:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
Install and Access the AP in Your
Network
802.11ac Wireless Access Point Model WAC104
27 User Manual