Subaru 2001 Legacy Owner's Manual page 429

Hide thumbs Also See for 2001 Legacy:

Table of Contents

5. Install a new bulb in the socket.

6. Set the bulb socket into the rear combination light assembly and

turn it clockwise until it locks.

7. Close the cover and latch the clock.

B Station wagon

n Brake/tail and rear turn signal light bulbs

It may be difficult to replace the bulbs. It is recommended that you

have the bulbs replaced by your SUBARU dealer.

1. Remove the light bulb replacement service hole covers at two

places by prying the edge of the cover with a regular screwdriver.

2. Remove the upper and lower nuts. Then, slide the rear combina-

tion lamp assembly to the rear and remove it from the vehicle.

Brake/tail light bulb

Rear turn signal light bulb

Chapters

Table of Contents

2001 outback