Power Steering Fluid - Subaru 2001 Legacy Owner's Manual

Power steering fluid

B Checking the fluid level
WARNING
Be careful not to burn yourself because the fluid may be hot.
CAUTION
D When power steering fluid is being added, use only clean fluid,
and be careful not to allow any dirt into the tank. And never use
different brands together.
D Avoid spilling fluid when adding it in the tank.
The power steering fluid expands greatly as its temperature rises; the
fluid level differs according to fluid temperature. Therefore, the reser-
voir tank has two different checking ranges for hot and cold fluids.
Check the power steering fluid level monthly.
1. Park the vehicle on a level surface, and stop the engine.
2. Check the fluid level of the reservoir tank.
When the fluid is hot after the vehicle has been run: Check that the oil
level is between "HOT MIN" and "HOT MAX" on the surface of the
reservoir tank.
When the fluid is cool before the vehicle is run: Check that the oil level
is between "COLD MIN" and "COLD MAX" on the surface of the res-
ervoir tank.
3. If the fluid level is lower than the applicable "MIN" line, add the
recommended fluid as necessary to bring the level between the
"MIN" and "MAX" line.
Maintenance and service
– CONTINUED –
11-29