Subaru 2001 Legacy Owner's Manual page 207

Bass
(BAS)
n Fader and balance control
The volume control dial
dial become the controls for Fader or Balance when you select the
appropriate fader and balance control mode.
Choose desired setting for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.
To change control modes: Each brief press of the "FAD/BAL" button
6
changes control modes in the following sequence starting from
fader control mode. (When the radio is turned on, the control mode is
in the volume control.)
Fader
(FAd)
n Display illumination dimness cancellation
The brightness of the radio display dims when the light switch is in the
"p" or "w" positions. If this makes the display difficult to read,
press the volume dial for more than two seconds to return the display
to original brightness.
B FM/AM selection button (FM/AM)
Push the "FM/AM" button
Push the "FM/AM" button when the radio is on to select FM1, FM2 or
AM reception. Each time this button is pressed, the band will change
in the following order:
FM1
The display indicates which one is currently selected.
Middle Treble
(MId) (TRE)
7
normally function as volume control. The
Balance Volume
(BAL) (VOL)
1
when the radio is off to turn on the radio.
FM2
Volume
(VOL)
AM
– CONTINUED –
Audio
5-21