Subaru 2001 Legacy Owner's Manual page 198

B Tape travel indicators
These indicate the direction the cassette tape is moving.
" : Indicates that the top side of the cassette is being played back.
A : Indicates that the bottom side of the cassette is being played
back.
B Program button (PROG)
When the program button
travel indicators will switch and the player will begin playing back the
opposite side of the tape. The same mechanism is automatically acti-
vated when the end of the tape is reached. This allows the opposite
side of the tape to play, providing continuous playback.
B Fast-forward button (FF)
To fast-forward the tape, press the "FF" button
warding, lightly press the "
B Rewind button (REW)
To rewind the tape, press the "REW" button
lightly press the "
B Eject button (
When " " button
tape is ejected.
The ejection function is also active when the ignition switch is in the
"LOCK" position. Always make certain that you remove the cassette
tape.
B Repeat (RPT)
Press the "RPT" button
repeatedly. The "RPT" indicator will come on and the song will be
played continuously. To cancel the repeat mode, press the button
again. Then the "RPT" indicator goes out, and normal playback mode
is restored.
5-12
Y
is pressed during playback, the tape
8
" button.
8
" button.
)
8
is pressed, playback stops and the cassette
W
while a song is playing to play the song
E
. To stop fast-for-
R
. To stop rewinding,