Subaru 1998 Legacy Owner's Manual page 50

OM-H2702 HB0231
HB0232
To open the hood:
1. Pull the hood release knob under the instrument panel.
2. Release the secondary hood release located under the front of the
engine hood by moving the lever toward the left. Lift up the hood, release
the hood prop from its retainer and put the end of the hood prop into the
slot in the hood.
To close the hood:
1. Lift the hood slightly and remove the hood prop from the slot in the
hood and return the prop to its retainer.
2. Lower the hood until it approaches about 6 in. (15 cm) from the
closed position and let it drop.
3. After closing the hood, be sure the hood is securely locked.
If this does not close the hood, release it from a slightly higher position.
Do not push the hood forcibly to close it. It could deform the engine
hood.
1-22