Cruise Control (If Equipped); To Set Cruise Control - Subaru 1998 Legacy Owner's Manual

The power steering system operates only when the engine is running.
If you lose power steering assist because the engine stops or the system
fails to function, you can steer but it will take much more effort.

Cruise control (if equipped)

WARNING
Do not use the cruise control under any of the following condi-
tions. This may cause loss of vehicle control:
D driving up or down a steep grade
D driving on slippery or winding roads
D driving in heavy traffic
Cruise control enables you to maintain a constant vehicle speed without
holding your foot on the accelerator pedal and it is operative when the
vehicle speed is 25 mph (40 km/h) or more. Make sure the main switch is
turned "OFF" when the cruise control is not in use to avoid unintentional
cruise setting.
J To set cruise control
Main switch
1. Push the "CRUISE" main switch.
2. Depress the accelerator pedal until the vehicle reaches to the desired
speed.
3. Push the control lever downward in the "SET, COAST" direction and
7-24
Control lever
HB0205 OM-H2717