Table of Contents
Advertisement
Audio
J Program switching buttons (PROG)
When the program switching buttons ("REW" and "FF" buttons) are
pressed at the same time during playback, the tape travel indicators will
switch and the player will begin playing back the opposite side of the
tape. The same mechanism is automatically activated when the end of
the tape is reached. This allows the opposite side of the tape to play,
providing continuous playback.
J Fast-forward button (FF)
To fast-forward the tape, press the "FF" button. To stop fast-forwarding,
press the "REW" button.
J Rewind button (REW)
To rewind the tape, press the "REW" button. To stop rewinding, press the
"FF" button.
J Stop and eject button (EJECT)
When "EJECT" button is pressed, play back stops and the cassette tape
is ejected.
Before the ignition switch turn to the "OFF" position, eject the tape from
the player. Always make certain that you remove the cassette tape.
J Dolby NR button (
)
Press "
" button when playing tapes recorded using the Dolby NR
system*. The "
" indicator will light up and high-frequency noise on
the tape will be reduced for clearer sound reproduction.
* Noise reduction system manufactured under license from Dolby Laboratories
Licensing Corporation. "Dolby" and double-D Symbol are trade marks of Dolby
Laboratories Licensing Corporation.
– CONTINUED –
5-25
Advertisement
Chapters
Table of Contents
