Subaru 1998 Legacy Owner's Manual page 136

directed temporarily toward the windshield to assist the windshield
defroster. If this is done, the driver's side grille should always be
returned to its normal positions so that the warm air flow can then be
used to defrost the driver's side window.
J Heating
OFF position
To direct warm air toward the floor:
1. Set the air inlet selection button to the "OFF" position.
2. Push the "
3. Set the temperature control lever to the most comfortable level.
4. Set the fan speed control dial to the desired speed.
To stop the warm air coming from the ventilator at each side of the instru-
ment panel, turn each ventilator thumb-wheel to the "
4-8
HB0254
" button in.
OM-H2186
" position.