Subaru 1998 Legacy Owner's Manual page 178

CLOCK FUNCTION
The radio has a built-in clock function that displays the time when the
ignition switch is turned either to "ACC" or "ON".
1
DISP button
2
Tuning button
J When turning on the radio
When the radio is switched on or the station is changed, the time display
is replaced by the frequency display. However, after the frequency has
been displayed for five seconds, it is replaced by the time display again.
If you wish to see the time while the frequency is being displayed, press
the "DISP" button and the frequency display will be replaced with the
time display.
J Setting the time
1. Turn the ignition switch to "ACC" or "ON".
2. To adjust hour: Press the "DISP" button and the "TUNE" button indi-
cated with "B" together to advance the hours in one-hour increments.
Keeping the buttons pressed advances the hours quickly.
3. To adjust minute: Press the "DISP" button and the "TUNE" button in-
dicated "Y" together to advance the minutes in one-minute increments.
Keeping the buttons pressed advances the minutes quickly.
5-26
1
2
HB0324