Subaru 1998 Legacy Owner's Manual page 363

Wagon
B Sedan (except GT models)
1. Remove the high mount stop light cover by prying on the edge
with a screwdriver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
B Wagon
1. Remove the mounting screw covers by prying on the edge with a
screwdriver.
2. Remove the mounting screws using a phillips screwdriver and then
remove the high mount stop light cover.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the covers.
NOTE
Other bulbs may be difficult for owner to replace. Have your SUBARU
dealer replace these bulbs if necessary.
Maintenance and service
OM-H0355
– CONTINUED –
10-59