Cleaning Aluminum Wheels; Cleaning Fog Light Lens (For Sus) - Subaru 1998 Legacy Owner's Manual

Cleaning aluminum wheels

D Promptly wipe the aluminum wheels clean of any kind of grime or
agent. If dirt is left on too long, it may be difficult to clean off.
D Do not use soap containing grit to clean the wheels. Be sure to use a
neutral cleaning agent, and later rinse thoroughly with water. Do not
clean the wheels with a stiff brush or expose them to a high-speed wash-
ing device.
D Clean the vehicle (including the aluminum wheels) with water as soon
as possible when it has been splashed with sea water, exposed to sea
breezes, or driven on roads treated with salt or other agents.

Cleaning fog light lens (for SUS)

Counter-clockwise
Light lens horizontal
center line
1. Stop the vehicle in a safe place.
2. Stop the engine and turn off the fog lights.
3. Check that the fog lights are not hot. Then, grasp the fog light protec-
tor and turn it approximately 10 counter-clockwise.
4. Pull the protector off the fog light.
5. Wash the lens with water.
6. Apply the grid protector to the lens at an angle of approximately 10
from the fog light's horizontal center line. Then, turn the protector clock-
wise until it stops. Finally, check that the protector's horizontal bars are
parallel with the fog light's horizontal center line.
HB0296
Appearance care
– CONTINUED –
9-7