Rear Combination Lights - Subaru 1998 Legacy Owner's Manual

Hide thumbs Also See for 1998 Legacy:

Table of Contents

J Rear combination lights

1. Unlatch the rear combination light cover by pulling the knob. Open

the cover up.

2. Remove the bulb holder from the rear combination light assembly by

turning it counterclockwise.

3. Remove the bulb from the socket by pushing it and turning counter-

clockwise. Install a new bulb.

4. Set the bulb holder into the rear combination light assembly and turn

it clockwise until it locks.

5. Close the cover and latch the lock.

Maintenance and service

– CONTINUED –

Chapters

Table of Contents