Understanding the printer menus
Use
Negative Image
Off
On
Shadow Detail
‑4 to 4
Adjust ADF Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On
FTP Settings menu
Use
Format
PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
RTF (.rtf)
TXT (.txt)
To
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only in some printer models.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Enable the use of the cc and bcc fields.
Note: Off is the factory default setting.
To
Specify the file format.
Notes:
•
PDF (.pdf) is the factory default setting.
•
To use the RTF (.rtf) or TXT (.txt) option, purchase and install the
AccuRead OCR solution.
191