Ricoh Ri 2000 User Manual page 151

4. Adjustments
After printing the pattern for the print position adjustment, you need to find an
appropriate value based on the alignment files to the 4 arrows on the platen.
Position the paper so that the cross on the test print paper comes at the right
bottom corner.
• You can select values between "-4.0" and "+4.0" in increments of 0.1 mm.
• To move the print position to the "A" direction, enter a value between "-1" and "-4" in the
Table input area.
• To move the print position to the "B" direction enter a value between "+1" and "+4" in the head
input area.
• To move the print position to the "C" direction enter a value between "+1" and "+4" in the table
input area.
• To move the print position to the "D" direction enter a value between "-1" and "-4" in the Head
input area.
After entering the values, press [ALIGN] to set the values.
Repeat the process until the print appears to be centered.
151
RICOH Ri 2000 User Manual