Table of Contents
Advertisement
Problem 5: Scanner immediately is turned off.
Probable cause
The type of battery is not set to match the battery in use.
A fully charged rechargeable battery or a new LR6
(AA) alkaline battery is not loaded.
Memory effect is occurring when the AA rechargeable
nickel-metal hydride battery is used.
Check the auto power-off setting.
Set to match the type of battery in use.
Load a fully charged rechargeable battery or a new LR6 (AA) alkaline
battery.
Discharge the AA rechargeable nickel-metal hydride battery using the
dedicated charger, for example, and then recharge the battery before
using it again.
For details, refer to the User's Manual for the AA rechargeable
nickel-metal hydride battery or the dedicated charger for the AA
rechargeable nickel-metal hydride battery.
If auto power-off is set, the scanner is automatically turned off if it is
not used for the preset time.
The auto power-off setting can be changed only on the configuration
software (Scan Tune App).
79
What to do:
Advertisement
Table of Contents
