Table of Contents
Advertisement
(2) Adjusting the beeper volume
You can adjust the beeper volume to three levels - high, medium and low - using the QR-coded parameter menu or
configuration software (Scan Tune App).
Enabling the Bluetooth
Note:
adjusted.
Each time the "Beeper volume" QR Code symbol is scanned, the beeper volume cycles as shown below.
Even if the scanner is turned off, this setting will be retained.
The factory default is High.
®
interface with the "Start operation" QR Code symbol allows the beeper volume to be
High
Medium
Low
30
Advertisement
Table of Contents
