Table of Contents
Advertisement
(3) Start up the Bluetooth
iOS
(1)
Start up the iOS "Setup" icon.
(2)
Select "Bluetooth".
(3)
Select "SE1".
The scanner beeps twice when a successful connection is made.
* The setting of the software keyboard function can be changed only when connecting the scanner to iPhone or iPad.
Whether or not to display the software keyboard can be switched by pressing the magic key for approx. 500 msec.
Android (HID Profile)
(1)
Start up the Android "Setup" icon.
(2)
Select "Bluetooth".
(3)
Select "SE1".
(4)
When the "PIN" code confirmation is displayed, enter "1234".
The scanner beeps twice when a successful connection is made.
Android (SPP Profile)
(1)
Start up the Android "Setup" icon.
(2)
Select "Bluetooth".
(3)
Select "SE1".
(4)
When the "PIN" code confirmation is displayed, enter "1234".
(5)
When the scanner is successfully connected, "SE1" is displayed on the paired device.
* "Connect" is displayed on the screen; however, at this time, the LED does not light and the scanner does not beep.
(6)
In the operation app, perform "Connect" and select "SE1". This initiates the link and the scanner sounds the beep
twice.
Windows (HID Profile)
(1)
The Bluetooth icon is displayed in the notification area at the bottom right of the screen. Right click the icon and then
click [Add a Device].
(2)
From the list of devices, select "SE1".
Drive installation starts.
(3)
When the "PIN" code confirmation is displayed, enter "1234".
(4)
Select "Skip obtaining driver software from Windows Update".
After a while, the Bluetooth HID device is installed and a link is established.
The scanner beeps twice when a successful connection is made.
®
wireless link of the connected device and connect the device to the scanner.
8
Advertisement
Table of Contents
