Denso SE1-QB User Manual page 73

Code 128, GS1-128 (EAN-128)
Items
Reading Code 128
Reading GS1-128 (EAN-128)
Minimum number of readable digits
for Code 128
Maximum number of readable digits
for Code 128
Minimum number of readable digits
for GS1-128 (EAN-128)
Maximum number of readable digits
for GS1-128 (EAN-128)
Transmission of FNC1 for Code 128
and GS1-128 (EAN-128)
(Note 1) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and GS1-128 (EAN-128) at the same time.
(Note 2) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Code 93
Items
Reading Code 93
Minimum number of readable digits
for Code 93
Maximum number of readable digits
for Code 93
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and 1-digit check
digit)
1 to 99 digits
(excluding start/stop codes and 1-digit check
digit)
Disable
Transmit GS
User-defined
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and 2-digit check
digit)
60
Defaults


1 digit
99 digits
1 digit
99 digits

Defaults

1 digit
99 digits
: Can be changed only with the configuration software.
Refer to:
Section 11.2
(See Note 1.)
(See Note 2.)
(See Note 2.)
Section 11.2
Refer to:
Section 11.2
(See Note 1.)